Nanjing Aokang Analytical Instrument Co., Ltd.Contact Person: Zhou Yuping
Address: No. 28 Shuanggao Road, Development Zone, Gaochun County, Nanjing
KA-TS3 hot metal quality management instrument is a high-speed instrument for quickly detecting carbon and silicon elements and carbon equivalent in front of gray cast iron and ductile cast iron furnace. Easy to use, no professional operator required, high detection accuracy. According to the product grade, the content of carbon-silicon alloy is increased or decreased automatically.
炉前铁水质量管理仪是一款炉前测量精度更高使用更稳定的zui新一代炉前铁水质量管理仪。 KA-TS3 front furnace hot metal quality management instrument is a new generation of front furnace hot metal quality management instrument with higher measurement accuracy and more stable use. The rapid thermal analysis technology in front of the cast iron furnace uses the solidification temperature curve of the formation process of the cast iron as the measured object, and mathematically analyzes the solidification temperature curve to obtain the characteristic points of the curve under different components. CE ）碳含量（ C% ）、硅含量（ si% ）等指标的铸铁炉前快速分析技术，测量精度可以达到 CE 0.10 、 C 0.05% 、 si 0.10% 是铸铁生产中炉前使用的简洁、快速、准确的仪器。 According to the pre-confirmed mathematical model, the carbon equivalent ( CE ) of the molten iron, the carbon content ( C% ), the silicon content ( si% ) and other indicators of the rapid analysis technology before the cast iron furnace, the measurement accuracy can reach CE 0.10 , C 0.05% , Si 0.10% is a simple, fast and accurate instrument used in front of the furnace in the production of cast iron. 2-3 分钟，在铁水可等待的时间内完成检测，然后根据自动计算出的增碳剂、硅铁、废钢投放量对铁水成份进行调整，得到合适的铁水成份后进行浇注。 The detection time of the thermal analyzer is about 2-3 minutes. The detection is completed within the waiting time of the molten iron, and then the molten iron composition is adjusted according to the automatically calculated amount of the recarburizer, ferrosilicon, and scrap steel. After obtaining the appropriate molten iron composition Do the pouring.
KA-TS3 main features:
、碳、硅元素含量的检测 1. Detection of carbon and silicon content
、碳当量的检测 2. Detection of carbon equivalent
、球化率、蠕化率判定 3. Judgment of spheroidization rate and creep rate
、抗拉强度的判定 4. Judgment of tensile strength
、目标材质的设定 5. Setting of the target material
、自动计算增碳量剂、硅铁、废钢的投放量 6. Automatically calculate the amount of carbon increaser, ferrosilicon and scrap steel
、自动绘制碳硅、碳当量、初晶温度共晶温度变化曲线图， 7 , automatic drawing of carbon silicon, carbon equivalent, eutectic temperature change curve,
、数据资料的保存与再现 8. Preservation and reproduction of data
、摄氏 / 华氏温度的切换 9 , Celsius / Fahrenheit switching
、初晶温度、共晶温度的测定 10 、 Determination of primary temperature and eutectic temperature
、内设 20 条检量线，可根据各工厂铁水的实标情况进行设定，使检测更精确。 11. There are 20 inspection lines inside , which can be set according to the actual standards of the molten iron in each factory to make the detection more accurate.
CE ）： 3.0-4.8 Carbon equivalent ( CE ): 3.0-4.8
c% ）： 2.5-4.8 Carbon content ( c% ): 2.5-4.8
Si% ）： 0.5-3.5 Silicon content ( Si% ): 0.5-3.5
If it exceeds the above range, the detection accuracy may become unstable or the detection may not be performed.